SRAM APEX® 1 HRD Shift-Brake Control
The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter Apex 1 HYDROR™. Using our proven HYDROR™ braking system, Apex 1 delivers quiet confidence on every ride.
Mated to our HYDROR™ brake lever is our DOUBLETAP™ 11-speed shift lever, built to provide accurate shifting that you can rely on no matter where you ride.
- SRAM Road ExactActuation™ 11-speed compatible
- Uses DOT 5.1 brake fluid
- Caliper available in both 74mm and Flat Mount versions
- Lever body design offers excellent finger wrap, comfort and control
- Easily converts between 160mm and 140mm rotors with adaptor brackets
- Forged aluminum disc caliper with steel-backed organic pads and steel hardware
- Two piston hydraulic caliper
USD: $199 - $249
Euro: €233 - €293
Euro MSRP includes VAT
Please see our Product Authentication Warning
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as original equipment only. See your dealer for details.
*Maximum Suggested Retail PriceFind a Dealer
Specifications for SRAM APEX® 1 HRD Shift-Brake Control
|Recommended Group||SRAM APEX® 1|
|Retail Availability||June 2016|
DoubleTap® makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars.
DoubleTap® uses two pawls, one for holding the ratchet wheel, and one for transporting it up and down through the gear change. The pawls are arranged in a way so that they can leapfrog each other depending on how far, and with how much pressure, you push the shift lever.
With short, rapid taps the transport pawl (04) moves the ratchet wheel (02) up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximized 15° angle) with the holding pawl (03) and the transport pawl leapfrogging each other quickly and smoothly.
Location, Location, Location: DoubleTap’s one-motion unidirectional levers (05) work flawlessly no matter what position you’re shifting from. Its double-articulated design (01), which is completely separate from the brake pivot, is easily engaged from the hoods or the drops.
Unlike all other forward controls, DoubleTap® also lets you pull the shift lever in against the bars so you can upshift while sprinting or attacking without giving up a firm grip. On DoubleTap® controls, the brake and shift levers are completely independent, each operating with their own pivot points. This not only allows for the multiposition functionality, it also eliminates the risk of engaging brakes or shifters unintentionally—an unfortunate side effect of other shift/brake lever designs.
- EXACT ACTUATION™
When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.